Product Description

Capacitors compensate for capacitive no power. It is often subject to harmonic currents. Influence of closing inrush current and operating overvoltage. Causes capacitor damage and power factor reduction. To this end, it is necessary to install a series reactor on the front of the capacitor to absorb harmonics, protect the capacitor, avoid the impact of harmonic voltage and current, and improve the power factor of the system and the life of the capacitor.

Model and meaning

Structural features

1. The product is divided into three phases and single phase, which is dry type with iron core;
2. The iron core is made of excellent cold-rolled silicon copper sheet, punched and sheared by a high-speed punching machine.
3. The coil is made of excellent insulated wire and wound by a special machine, which has the advantages of good flatness and beautiful appearance;
4. During the reactor assembly process, all the clips are treated with anti-corrosion treatment. The key clips are made of non-magnetic materials, and the process of pre-baking-vacuum dipping-thermal baking curing makes the reactor coil and iron core firmly become- The body greatly reduces the temperature rise and noise during operation, effectively improves the quality factor of the reactor and reduces the effect of harmonics.
5. The size of the reactor refers to the standard cabinet size design, small size, convenient wiring, greatly saving the user cabinet cost investment.

Performance indicators and technical parameters

1. Can be used for capacitor voltage: 0.4KV 0.45KV 0.48KV 0.525KV 0.66KV 0.69KV;
2. Reactance rate: 1 percent 5.67 percent 6 percent 7 percent 12 percent 13.8 percent 14;
3. Withstand voltage level: 5KV / min Insulation level: B level, F level, H level, noise = 30dB, overload capacity = 1.35 times continuous work

Use environment

1. The altitude does not exceed 2000 meters;
2. Operating ambient temperature -25 degrees +45 degrees. The relative temperature does not exceed 90%;
3. No harmful gases and flammable and explosive materials around;
4. The surrounding environment should have good ventilation conditions, if installed in the cabinet, ventilation equipment should be added.

Wiring